Monster Powerline 400 Signature Series Powercord (New Version)
Below is the brief introduction of each elements that make up the complete powercord:
1. Power cable
- Monster Powerline 400 Signature Series (genuine cable direct order from oversea authorised dealer).
- Ultra-High Current AC Power Cable with High Density Shielding and Multi-bundled wire technology with 261 strands large gauge
conductors (10 gauge with outer diameter of 15mm) for maximum current transfer.
- Dual 100% mylar, aluminium sheet wrap, copper drain wire and 95% copper braid shielding for maximum rejection of EMI and
RFI.
- The copper drain wire and the copper braiding will be connected together with the earth cable at the earth pin of male connector
plug, leaving the other end of the drain wire and copper braiding unconnected at the iec plug.
- This connection helps to pick up any RFI/EMI along the powercord and drain off via the earthing. It will also avoid the interference
from getting into the equipment due to the other end of the drain wire and copper braiding unconnected at the iec plug.
- Do note that the earth cable of the powercord are connected at both male connector plug and iec plug to provide proper earthing
1. Power cable
- Monster Powerline 400 Signature Series (genuine cable direct order from oversea authorised dealer).
- Ultra-High Current AC Power Cable with High Density Shielding and Multi-bundled wire technology with 261 strands large gauge
conductors (10 gauge with outer diameter of 15mm) for maximum current transfer.
- Dual 100% mylar, aluminium sheet wrap, copper drain wire and 95% copper braid shielding for maximum rejection of EMI and
RFI.
- The copper drain wire and the copper braiding will be connected together with the earth cable at the earth pin of male connector
plug, leaving the other end of the drain wire and copper braiding unconnected at the iec plug.
- This connection helps to pick up any RFI/EMI along the powercord and drain off via the earthing. It will also avoid the interference
from getting into the equipment due to the other end of the drain wire and copper braiding unconnected at the iec plug.
- Do note that the earth cable of the powercord are connected at both male connector plug and iec plug to provide proper earthing
2. US male connector plug and IEC plug
- This model is higer series with better plating. Unlike others made of brass.
- Very good quality and well plated pin. The core material is made up of 99.99% pure OFC copper with platings. The Earth pin is
Palladium plated while the Live and Neutral pins are 24K gold plated for both type of plugs
3. Aluminium Casing
-It is nicely polished with at least 2mm thick ( Much thicker at the bottom end)
-The customised casing can be fitted nicely to provide perfect enclosure for the US male connector plug and IEC plug
-It helps to provide shielding for the US male connector plug and IEC plug.
-It also helps to improve cosmetic appearance
Result and feedbacks
The powercord has excellent shielding configuration that results in very low noise floor. When noise is eliminated, the background is much quieter , hence it will give better details.
Other than good shielding, the thick gauge and high copper purity conductors resulting in its performance comparable to many more expensive cables without the need to pay for a premium.
New version is out now with outer nylon braiding to provide value added features for better insulation and nicer outlook.
The powercord is professionally terminated with care in stripping process and further secure by hot glue prior to heat sleeve. The final product will be tested by meter and well pack before presenting to valued customers.
Kindly note that other option is also available
- MK audiophile grade UK plug / US plug
- Figure 8 plug / IEC/ 20A IEC
Pricing (In Singapore dollars not inclusive of registered postage)
1. Powercord (1m) with male connector plug, iec plug with aluminium casing ($130)
2. Powercord (2m) with male connector plug, iec plug with aluminium casing ($185)
Please feel free to contact me at 91182849 or email me at [email protected]
The powercord has excellent shielding configuration that results in very low noise floor. When noise is eliminated, the background is much quieter , hence it will give better details.
Other than good shielding, the thick gauge and high copper purity conductors resulting in its performance comparable to many more expensive cables without the need to pay for a premium.
New version is out now with outer nylon braiding to provide value added features for better insulation and nicer outlook.
The powercord is professionally terminated with care in stripping process and further secure by hot glue prior to heat sleeve. The final product will be tested by meter and well pack before presenting to valued customers.
Kindly note that other option is also available
- MK audiophile grade UK plug / US plug
- Figure 8 plug / IEC/ 20A IEC
Pricing (In Singapore dollars not inclusive of registered postage)
1. Powercord (1m) with male connector plug, iec plug with aluminium casing ($130)
2. Powercord (2m) with male connector plug, iec plug with aluminium casing ($185)
Please feel free to contact me at 91182849 or email me at [email protected]